Skip to main content
You have permission to edit this article.
Edit
Replace a kitchen faucet
AP

Replace a kitchen faucet

  • 0
diy-faucet-20211011

To tackle this job yourself you need some basic plumbing tools.

While it may seem that replacing a kitchen faucet will be a straightforward swap of an old faucet for a new one, the first phase of the job (disconnecting it from a tangle of pipes (possibly corroded), that are connected to a dishwasher and garbage disposer) may be the most challenging. Another issue is working in the dark on your back with your head and shoulders squeezed in the confines of a base cabinet.

There is a staggering amount of kitchen faucet styles, finishes and features to choose from with price tags from $100 to $1,000. But we’re talking about a basic chrome, deck-mounted, single-handle, pull-out sprayer faucet.

To tackle this job yourself you need some basic plumbing tools, along with a basin wrench, a specialty tool that twists and turns so it can loosen and adjust tough-to-reach fasteners on a faucet assembly. As long as you’re there, replace the old supply tubes with new, flexible stainless-steel supply tubes for the hot and cold water lines. Make sure to turn off the water supply at the shutoff valves under the sink or at the main water supply valve. You’ll find how to videos online to get an idea of what’s involved.

A plumber will charge $271, which includes labor and material, to do the job. You can buy the faucet for $170 and install it, saving 37%.

To find more DIY project costs and to post comments and questions, visit www.diyornot.com.

Pro Cost — DIY Cost — Pro time — DIY Time — DIY Savings — Percent Saved

$271 — $170 — 2.5 — 3.0 — $101 — 37%

Omaha World-Herald: Inspired Living

* I understand and agree that registration on or use of this site constitutes agreement to its user agreement and privacy policy.

Related to this story

Most Popular

Q: I am fortunate enough to be a snowbird. We own a condo in Jacksonville, Florida. Our condo is in a development that was purchased by an investor/developer in the late 1980s. The developer improved the existing units, added several new buildings, sold some of the units and rented out the rest. We think the developer still controls a bit over 51% of the units.

Do you wonder how septic systems work? I never gave it much thought in all the years I lived in Cincinnati. Every house I lived in was connected to a municipal sewer line. Just about every house I built I connected to a sewer line. Few of the houses I built needed their own septic systems.

Get up-to-the-minute news sent straight to your device.

Topics

all

Breaking News

Huskers Breaking News

News Alert